Hot off the Press


 

SHARE:  

La-Z-Boy Takes Delivery of Feed Lines from Dallas Industries

Tuesday, December 19, 2017
 
Dallas Industries, Troy, MI, a manufacturer of coil-handling, press-feeding equipment and controls for the stamping industry has announced that the La-Z-Boy facility in Neosho, MO, has taken delivery on two feed lines. One line is a 36-in.wide conventional line featuring model DRF-536 cabinet mounted servo-feed, threading table, model DPS-3.5-36-7 powered straightener and a 20,000-lb. load capacity reel with load car. The second line is an 18-in. wide conventional feed line featuring La-Z-Boy’s existing model DRF-418 cabinet mounted servo feed (with a new controls retro-fit), threading table, model DPS-3-18-7 powered straightener and a 6000-lb. load capacity reel.

Both lines were built on an Allen-Bradley, Ethernet-based control architecture and feature SyncLoop and ProfileSelect™. SyncLoop controls synchronize the feeder and straightener speeds to enhance the slack loop’s stability and control. ProfileSelect is a unique feed control system and a Dallas Industries exclusive. It uses a cam-motion (sinusoidal) profile for a feed motion that utilizes 100 percent of the press feed window, reducing stress on the material and the feed’s mechanical components.

For more, visit www.dallasindustries.com.

 


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors