Safety Update


 

SHARE:  

Draw-Bar Cover Protects Milling-Machine Operators

Monday, May 1, 2017
 

Milling machines can endanger operators should they come into contact with the machines’ high-speed rotating draw bars. Protect operators from this inherent danger by implementing this new draw-bar cover from Rockford Systems, designed to protect workers from rotating shafts 7 ft. or less from the floor or working platform.

The cover guards the turning draw bar with a non-rotating, smooth, welded-steel enclosure, firmly secured to the mill with a ring magnet and a 24-in. zinc-plated steel anchor chain. Simple to install, the draw-bar cover prevents clothing, hair or hands from being grabbed by the moving shaft. The welded-steel enclosure has a 4.95-in.-dia. base and 7.125-in. extrusion, and weighs 4 lb.

Rockford Systems LLC: www.rockfordsystems.com

 

See also: Rockford Systems, LLC

Related Enterprise Zones: Safety


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors