9:05 a.m.

Material Engineering for Sheet Metal Forming--Young’s Modulus, Hardening Curve, n-value, r-value, Yield Surface, Forming Limit Curve, Strain Rate Dependency and Kinematic Hardening

Abstract To Come …

10:25 a.m.

Loads in a Stamping Press; Dealing with Off-Center Loading

Due to the loads generated during stamping, every press deforms to some extent. Failing to understand these loads, and how to account for them, may lead to expensive maintenance and downtime or to a reduced press and tool life. During this presentation, we will talk about press loads such as forward, reverse or off centered and how to identify them during the stamping process.

9:05 a.m.

New Challenges in Stamping Using AHSS and Aluminum

Abstract To Come …

11:25 a.m.

Transfer System Optimization—Best Practices for Improving Throughput

Abstract To Come …

9:05 a.m.

Springback Prediction and Compensation During Draw Operations

Abstract To Come …

10:10 a.m.

Selecting a Press: Conventional Mechanical (Flywheel) or Servomechanical

Abstract To Come …

11:25 a.m.

Servo-Press Technology—an Advanced Course

Abstract To Come …

9:05 a.m.

Tool and Die Maintenance

As we know, part dies have high demand, and it is complicated to carry out maintenance and the time is very short. This is a frequent issue resulting in having to stop the line. So, in this conversation we will discuss the tools around this situation and how to avoid bad practices.

10:10 a.m.

Metalworking Fluids 101 + Your Bottom Line

The presentation titled "Metalworking Fluids 101 + Your Bottom Line," by Robert Anderson, V.P. of Sales and presented by Pedro Martinez, delves into the intricate world of metalworking fluids (MWFs), their types, benefits, application strategies, and their impact on operational efficiency and costs. The presentation categorizes MWFs into several families such as petroleum oil-based, renewables resource-based, oil-based emulsion technologies, and synthetic solution technologies. It emphasizes the crucial role of additives in enhancing the performance of MWFs, including corrosion and stain inhibitors, extreme pressure additives, and emulsifiers.

Anderson and Pedro both stresses the importance of selecting the right extreme pressure additives to avoid over-compounding and unnecessary expenses. Lubricant consolidation is another critical theme, advocating for a reduction in the number of lubricants used on the shop floor to streamline operations and reduce issues. Anderson outlines a process for evaluating and consolidating lubricants based on performance, health and safety considerations, and cost implications.

The presentation further addresses the preparation for lubricant application, including pre-screening for stability, compatibility, and performance testing. A significant focus is placed on tooling performance, corrosion testing, and health and safety environmental considerations, emphasizing the importance of selecting MWFs that minimize health hazards and environmental impact.

Additionally, real-life case studies are presented to demonstrate the tangible benefits of choosing the right MWFs, including improved tool performance, reduced operational costs, and enhanced safety and environmental compliance. The case studies showcase scenarios in stamping lubricant performance, alkaline cleaner efficiency, solvent reduction, and the use of synthetic lubricants to prevent part fractures offering a glimpse into the strategic selection and application of metalworking fluids to optimize manufacturing processes and improve the bottom line.

11:10 a.m.

Sensor Basics

• Types of Sensors

• Proximity Sensors

• Proximity Sensor Applications

• Photoelectric sensors

• Types and Applications of photoelectric sensors

• Sensors for part expulsion

• Lack of material Detection

• Bench Tests

• Best practices